PeymanOnline Oluşturuldu: 24 Haziran, 2020 Share Oluşturuldu: 24 Haziran, 2020 hi i want to update firmware and bootloader of my GLC-196R that installed on a machine and i dont have its project file.so i want to know if i update my firmware and bootloader will i lose project program over plc?? what about reset plc (press reset button for 10 sec on start up)???does resseting Plc cause lose downloaded project over plc?? thank you Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
malikenes 25 Haziran, 2020 gönderildi Share 25 Haziran, 2020 gönderildi İf you update firmware or bootloader, you will lose the project. But you can upload the project, before update, if you know the project password. Default password is 1234. Press rest button 10 second, only turned the default value cpu ip address and cpu network password. You will not lose project. 1 Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...