Özgür Karagöz Oluşturuldu: 5 Nisan, 2023 Share Oluşturuldu: 5 Nisan, 2023 Merhaba benim GMT GLC-296T ekranda (2) PLC NO response 00-01-2 yazısı çıkıyor ne anlama geliyor lütfen yardımcı olurmusunuz Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
malikenes 6 Nisan, 2023 gönderildi Share 6 Nisan, 2023 gönderildi PLC nin 5-10 sn lik videosunu yükler misiniz? Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
ikram %s saat %s gönderildi Share %s saat %s gönderildi What, I've the same message error, could you please anyone help me to solve it😢 Thanks! Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
malikenes %s saat %s gönderildi Share %s saat %s gönderildi Can you send PLC' s video? We can see, is there any message. Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
ikram %s saat %s gönderildi Share %s saat %s gönderildi Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
malikenes %s saat %s gönderildi Share %s saat %s gönderildi Can you send PLC' s video? This is HMI' s photo. Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
ikram %s saat %s gönderildi Share %s saat %s gönderildi (düzenlendi) Sorry for this question, what do you mean by PLC's video? the wiring (cablage) ? %s saat %s tarihinde ikram tarafından düzenlendi Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
Hanifi %s saat %s gönderildi Share %s saat %s gönderildi The message on the HMI screen says there is no communication with the slave device. There could be several reasons for this error. We ask for a video showing the PLC status LED to understand whether the PLC is in run mode or error mode Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
ikram %s saat %s gönderildi Share %s saat %s gönderildi Hello, This is the video, if you need any other details please let me know, Just I wanna add a detail: the machine was working correctly but after high current voltage from my house I get this problem https://drive.google.com/file/d/1rdGh4FiEGIeL_wRkxAPsMcz4KHoE66ru/view?usp=sharing Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
Hanifi %s saat %s gönderildi Share %s saat %s gönderildi As seen in the video, the GMT HMI is connected to another brand's PLC and temperature module. Therefore, the problem of high voltage may be damaged those slave devices Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
ikram %s saat %s gönderildi Share %s saat %s gönderildi Hello, so the problem is related to the PLC device, as I understand there is a demaged component on it. my question now, should we have to change all the slave device module or just we can find the damaged component and replace it ? could you please give me a low cost solution to solve this problem.? Thanks! Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...