jimmybohm Oluşturuldu: 16 Kasım, 2020 Share Oluşturuldu: 16 Kasım, 2020 Hello, Is it possible to write to the CPU_AI_Min and CPU_AI_Max, via Modbus, whilst PLC is running? Is it possible to write to the Exp01_LC0_Full and Exp01_LC0_Exc, via Modbus, whilst PLC is running? Thanks, James Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
Hanifi 16 Kasım, 2020 gönderildi Share 16 Kasım, 2020 gönderildi Hi James These parameters cannot be changed via modbus whilst PLC in run mode. Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
jimmybohm 16 Kasım, 2020 gönderildi Yazar Share 16 Kasım, 2020 gönderildi If PLC is stopped, is Modbus still active? Can these parameters be changed whilst PLC is stopped? Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...
malikenes 17 Kasım, 2020 gönderildi Share 17 Kasım, 2020 gönderildi Modbus communication will be active only when plc is running. If you use lineer function, you can change the max or min value when plc is running. I think lineer function will be solve your problem. Alıntı Yorum bağlantısı Sitelerde Paylaş More sharing options...